Set of three white EZVALO rechargeable motion sensor lights

Rechargeable Motion Sensor Lights – Set of 3

$39.99 USD
Skip to product information
Set of three white EZVALO rechargeable motion sensor lights

Rechargeable Motion Sensor Lights – Set of 3

$39.99 USD
Shipping calculated at checkout.

Free standard shipping to the contiguous U.S. Shipping details

30-day return requests · Eligibility and return shipping conditions apply. Read our policy

Need help choosing? Contact Zenfaden.

Add a gentle glow to cabinets, closets and everyday corners with this set of three compact EZVALO rechargeable lights. Choose motion-activated lighting for dark spaces or keep the lights on for short tasks, with no hardwiring required.

Light that fits your routine

  • Three lights included: white housings in the 8-inch size, approximately 20 cm long each.
  • Motion sensing: Auto mode activates in low light when movement is detected within up to 10 ft and a 120° sensing angle. The light switches off after approximately 20 seconds without detected movement.
  • Your preferred glow: select warm 3000K, neutral 4500K or cool 6500K light. Press and hold the light-control button to adjust brightness.
  • Two operating modes: Always On and Auto, plus an Off setting.
  • Removable magnetic mounting: attach to a suitable magnetic metal surface or use the included adhesive iron plates, then remove the lights for charging.

Charging and runtime

Each light has a built-in 700 mAh rechargeable battery and a USB-C charging port. The supplier estimates approximately 3–4 hours of continuous use at maximum brightness, or 7–20 days with intermittent motion-activated use. Actual runtime varies with brightness, activation frequency and conditions. These are supplemental indoor lights, rather than a replacement for primary room or task lighting.

What's included

  • 3 × 8-inch rechargeable motion sensor lights
  • 1 × 3-in-1 charging cable
  • 6 × adhesive iron mounting plates
  • User manual

A wall power adapter is not listed among the included items. Decorative accessories shown in the photos are not included.

Setup and care

Charge and install according to the included manual. Apply mounting plates to a suitable clean, dry surface and keep the sensor unobstructed. Use indoors in dry locations, away from splashes and direct heat. Auto mode is intended for low-light conditions and may not activate in a bright room.